Gy6 150cc CVT Variator Rollers Swap, Belt, and Clutch Inspection.

Phantom Fixer
Phantom Fixer
28,021
0
Published 2022-03-25
Glixal High Performance Racing Clutch Assy with Clutch Bell for GY6 125cc 150cc 157QMJ 152QMI Engine Chinese Scooter
amzn.to/3DanEC9

1PZ V1P-842 Premium Drive Belt CVT (Size 842-20-30) for GY6 125cc 150cc 157QMJ/152QMI Scooter ATV Quad Wheeler Go Kart Moped
amzn.to/3tASUHf

Dr. Pulley 18x14 Sliding Roller Weights 10 Gram
amzn.to/3NlNc3M

Glixal ATKS-04024 18x14mm High Performance Racing Variator Roller Weights Set 152QMI 157QMJ GY6 125cc 150cc Scooter Moped ATV Go-Kart (16 gram)
amzn.to/3JH0IwR

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites. “As an Amazon Associate, I earn from qualifying purchases." Please Help Support the Channel.
All Comments (9)
  • @andrewjones2973
    I have a 2013 Honda vision 110. I have successfully mixed 9 gram and 14 gram rollers in the variator. It has made all the difference. Pick up is brilliant - would recommend this but cannot be responsible, if someone decides to do the same. The bike has done 38,000 miles. It's the original drive belt and the belt looks as good as new. I change the oil every 1,000 miles. I'm on the second spark plug and just replaced the original air filter.
  • @motoceng
    My 150 cc dayang vorei scooter has a 13 gram baga, the torque is very good, but it starts at 4000 rpm, the speed dropped a little at 110. It needs to see 120 125. How many grams of cylinder ball bag would you recommend without losing too much torque?
  • @YouMama1777
    I changed my variator ... I can't push the clutch down to get the belt on ... I took the clutch off and I still can't get it open even the smallest bit ... does that mean my clutch it bad? It was working fine prior to me opening up the case,
  • @piticutzouy8673
    Sall how I can remove the pinion from the variator so that I can put in a semireg
  • @amyhazelvang7198
    How faster are you going, how about RPM and weights performance? Did it work out for you with the 16/36..
  • @mrworldwide6770
    Whats the best wieght for more top end for my 150 cc i dont wanna sacrifice to much torque if possible not loose any i have a 26 mm carb with afternarket filter after market cdi and coil and plug i did the clutch spring to a 100 rom and got the green clutch any suggestions on wieght size and im 142 pounds