Brother Blew Up My Honda Cr 250!!!

Let it warm up for 20 seconds, then pin it in freezing weather, nothing could go wrong.

You need to put The spark plug back in😂

that thing needed a rebuild anyway took u like 20 kicks to start it

Thanksgiving Day you will never forget. Not Charlie's fault he almost always rides the Bikes while you film. You guy's are a great team keep it up, remind's me of my own time's growing up in rural America USA

I love the sound of the air from the spark plug hole

"The choke on should be better" 😂

tip the bike over to lube the cylinder with fuel lmao that's the dumbest thing i've ever heard honestly

He went around the corner and took out the spark plug, nice try anyway 😂

Charlie makes fun of people if they don't know about bikes. Then he goes out starts a bike that hasn't been started in 2 month's and doesn't even warm it up then he blows it up😂😂😂

You took the spark plug out it’s too much of a coincidence that it blew up u legit said “don’t blow it up” 50 times before it “blew up”

I bet his brother is used to walking bikes

why keep moving kickstart to possibly damage the cylinder more

It's not that he was going to fast on the start, the old cr probably has a shit ton of hours on it!

Bro from the sound of the motor you can tell it would blow up 🤣🤣

When 2 strokes start for the first time after at least a week there is no lube working through the engine so they feel weird for the first minute or so. Hence why you don’t pin it, and run a more diluted mixture

You have to adjust the carburetor settings to the weather.. (So the bike gets the right amount of air&gas mix.)

It probably doesn't help that you guys engine brake the shit out of your 2 strokes

I call BS.. right before he takes off "don't blow it up boy" Charlie couldn't blow up a 250 if he tried

Hmmmm seems strange that it doesnt kick and then woah amazingly it does after a cut,you can clearly hear the air from spark hole it sounds like...explains why it took so long to take it out...

Okay I have watched a lot of your videos. One thing you do not do when you buy a bike you do not drain the fuel. You do not check and clean the air filter. You do not pull the carburetor and clean that. And you also do not take the needle valve out of the carburetor. When this needle valve gets hard after a year 2 years it swells up leans the bike out in Burns it up like this bike did. So my suggestion to you is drain the fuel, clean the carburetor, change the needle valve. And put Castor 927 in your fuel 32 to 1 2 40 to 1 Castor 927 is the best oil to put in your fuel. So what if you pay 38 bucks for the big jug. You pay for what you get