Make LANTERN TOOLPOST FOR UNIMAT LATHE #945 tubalcain
10,314
Published 2024-06-15
youtube.com/playlist/PL6HIFled82YUdwJWqlpCv1Pms1HZ…
Please leave a comment, then like & subscribe.
#edestallathe #emcolathe #unimatlathe #microlathe #atlaslathe #southbendlathe #unimat
All Comments (21)
-
One of my favorite things about sat morning is a new Mr Pete vid. Thanks for all of your hard work and dedication over the years to shop education.
-
Morning coffee with Mr. Pete nothing better ☕️👍🏻
-
Nice to see another tool build.We shared this video on our homemade tool forum last week 😎
-
Thanks for taking the time to make these videos Mr Pete
-
I know I’ll never make this, but I do enjoy the Unimat series as I have one and need to start playing with it.
-
Don't worry about screw ups on this job. It's exactly what you're supposed to do in order to adjust the tool hight😂
-
Hi Lyle. What an interesting design for a lantern tool post. I’m a little bit dense this morning and can’t understand how the post locks into the T slot to keep it rigid. The big nut adjusts the height only, leaving the post loose. It has to lock but somehow I missed it.
-
Mister Pete is a National treasure.
-
I enjoyed your video. The Unimat is a really cute little lathe! Nice toolpost
-
I had a lantern type tool holder on my dad’s CRAFTSMAN LATHE. Mine had a Bowl shaped bottom that a round bottom base piece for the tool…so the tool could be tilted higher or lower to place the tool tip on the center line of the work.
-
Great project. Thanks, Mr. pete😊
-
Nice video. I am new to machining but have already found the aloris style tool post to bulky to get into some places, between the chuck and center. So I just got a new old lathe with only the aloris and was going to make a lantern style for when I need it. My new lathe is a '44 monarch CK12. 😊. Thanks for the video
-
On a 3 week RV trip with poor Internet service. Have time this morning to catch up on missed Mr. Pete!
-
Very nice MrPete. I really like the elevation method. Scaled up, this could work for a larger lathe, say a 10" or 12" to get into tight spots.
-
Hi Mr. Pete I have seen many of these Unimat tool post holders and you have hit them spot on and maybe better. I will attempt to send you pictures of theirs.
-
Nice, thanks for the video.
-
nice... could also be used to make adjustment feet for leveling the machine or attaching to a bench, etc.
-
I like my little Sherline Lathe. Thanks for the video!
-
Thanks for another video MrPete. All the best.
-
Thanks, Mr Pete
