Rain Bird AG-5 Maxi-Paw Pop-Up Impact Rotor Sprinklers

This the best video that I have seen about this sprinkler. It answered questions that I’d didn’t even know that I had. THANK YOU!

First comment on youtube ever. Thank you for a no BS, this is how you do it, I wont waste half your day talking about other nonsense... I'm renting a house and they stuck one of these in the ground right by our basement door in a corner spot and it spins 360° wasting about 270° worth of coverage. I knew it was something I could do, but I didn't want to break it trying to figure out how. Took me quite a while to stumble across your video after getting frustrated from all the other bs advice/videos, almost gave up, would of ended up breaking something, but you came through my friend. Little things like adjusting a sprinkler first thing in the morning can make for a good day, so again, thank you 🫡

I greatly appreciate your videos! You make adjusting sprinklers easy to understand. Thanks.

You put a lot of work into your video presentation. Thank you!

I learned a lot. Thank you sir. And the drone footage. Very smart.

Good demonstrations 😊Thanks

Very helpful!

Thanks for sharing this with me 😊

Shows the basic's on how set the area you want covered of the Rain Bird.

This was helpful. Thanks for sharing it. I'm installing one today to replace a rotary that isn't quite reaching far enough. I'll let you know how it goes.

Do I have to adjust the side screw or open it to adjust ? Or I can just leave it as it is ? And I will work too ?

The top comes off if you pry up the center cap then pinch the tabs together.

Thanks! Is there a way to make it rotate slower?

How do I shorten the distance of the water spaying? Thank you! Awesome Video! : )

You might mention and show that the Rainbird Wrench can be used to hold the Sprinkler Head up and steady thus enabling both hands to be free in making spray directions or throw distance adjustments.

Great video. Seriously!

I just finished my sprinkler diy system I installed 10 of these. I'm going to adjust later tonight. But I was concerned about the top cap also. Do you think it's easier with water on of course I'll get wet but what do you think?

I have a sprinkle zone with 2 pulsed rotory sprinkler headers like the one you described in this video. One head is from Rain Bird, the other is from Lawn Genie. Now both were stuck at the left side and not rotating. I can manually turn the heads to right, they turn back to left, and then stay stuck there. What kind of problem is this? Initially I thought one of the head is broken, but now I see both behave the same way, I think the heads may still be ok, but something else is wrong. Do you have any idea?

Mine is not returning to spray path, it gets stuck. Any help?

Good tutorial, thank you!