Top 5 Air Tool Hacks - I bet you didn't know them all before watching this!

Another hack is pushing fluid out of a container into a transmission or differential. Set your air compressor at about 5lbs (especially if you are moving liquid from a plastic container). Drill a hole in the cap of the container so a 3/8 feed tube fits tightly and another hole to press the tip of your air gun fits snug. With only 5 llbs of pressure fill the container with air to push the fluid out the container. This method works great on filling transmissions and differentials. Just make sure your container is strong enough to subject itself to 5 lbs of air. Great video

if you want your compressor to last dont forget about the condensation release tap on the bottom of it. Im pretty sure you have to release the water after every use otherwise you`ll end up with a dead compressor after just using it for just 2 or 3 years like I did.

Would this be useful for pushing dead skin and other dirt that gathers in the windings of bass strings, so we make them sound fresh again? Bass strings are now £30+ for a new set.

Nice compressor and kits James. Mick likes Hack #6, the one where he inflates his date with it. 😲😲

Nice One James separating buckets will come in handy👍 always air line out tractor cabs Thanks again

Love the ability to get grips on and off, including getting wheels off! Thanks for the tips!

I'd be lost without my 25ltr SGS compressor. Great hacks which i will remember. I'm going to check that 71 piece Air Tool Kit. Great demo.

Some great tips mate I have a sgs compressor. Good bit of kit had it over 3 year with no issues great video 👍

Few nice tips there James,

Nice. very handy to know 👍🏻

re filling air into an aerosol (that has stuff left inside but no propellant) is a good one

Remember your safety glasses/goggles when using your air line to blow dust about, you are going to end up with shit in your eye.

The bucket and fuel removal. Thank you. When I'm finished. I dust out my garage, concentrate on corners and hard to reach areas.

Air Hammer is fantastic for taking of flywheels

Ha excellent man ,your female assistant announcing the countdown sounds very attractive!!! Like especially the fuel/liquid pump. One of those why didn't I think of that....

Some useful tips there.👍 Not sure where all these compressors are made but there's a whole host of them around that look virtually identical apart from different badging. I bought a Proline 25litre around 17 years ago which I've just replaced with an Airmaster. Very useful tools and wouldn't be without one. Pressure brake system bleeding has saved me loads of faff in the past. Also DIY rust proofing/undersealing etc. I have to say good quality cordless tools like Milwaukee impact wrenches, drills, grinders etc have the edge though IMO with performance to match plus full portability. They're not particularly cheap though!

Nice James mate...

The biggest hack you missed is the regulator is restricting you air flow connect your air line to the inspection port of the air receiver with 1/2" connections and 13mm hose to the regulator you will be surprised how much better your tools run . Also i got some ride on mower wheels i would like you to try to take off with a air hammer as my 50ton ram will not move them .

Thanks James. Yes looks good. When are you giving away those gilets?

air attachment tool which can peel of the metals welded together