Create Log Periodic Antenna CLP5130-2
8,420
Published 2020-05-08
All Comments (20)
-
I am interested in this antenna for a ic9700 and would be putting it in my attic (Hoa). I’m excited for a part two as well. Any chance the literature mentions cross mounting two for both polarizations? Assuming a non conductive mast I bet it would work fine. 73
-
I am currently using an Elk LPA temporarily in my shack made for 2m/70cm. I have no trouble using 5 watts simplex at 17 to 20 miles to a couple of friends (I live up at 1,150 ft, they’re at 130’). The Elk is really just a portable antenna with no where near the coverage of this Create antenna. I believe the forward pattern of an LPA is wider than a yagi also. One advantage of the antenna you have there is one coax for 5 bands. That is just great. Sure, lose some gain compared to a yagi, but so many other advantages. It looked like when you were doing the sweep there that your antenna would cover the GMRS frequencies also.
-
Hello David, I got this and now returning it…as the instructions were poor and I could NOT get those 2 small front element sections to connect to the boom properly. I can tell you had a lot more patience and focus on its time and effort you needed for assembly. Yours looks a lot better than what I’ve gotten. The side note was I was able to read the Chinese funnies in the Chinese newspaper that was packed in the box that I purchased this unit from DX engineering. Happy hunting and let me know how your results turned out once they were on your tower. 73’s DE KC0QNA
-
I've used SCALA's very well-made log periodics in broadcast applications, and wanted to note that the Create log looks pretty sturdy to me. Logs excel in many applications, and I'll definitely be getting one.
-
Nice and reasonably compact. Bit too lopsided though, I would buy a second for the other side and just phase them together.
-
Well, I am very baffled by one thing. Mine doesn't have an N connector on the front, but it had the center pin soldered to the top plate in the front and it broke. I'm going nuts trying to fix it too. An N connector on the front looks much more durable! I'm wondering how my 50-1.2G create got the feedpoint and cable that it has. Baffling. Also no current balun needed? Is that just a piece of rubber between the plates? I've been using one on the mast. No trouble with the hot boom with the shield right next to it? Thanks!
-
I have CLP 5130 .90-220 MHZ.Geat video
-
What is the pros/cons of mounting the antenna vertically instead of horizontally?
-
How would this thing do as a scanner antenna when compared to a discone? I understand this is a directional antenna, so would it get more stations in the direction that I point it when compared to my current antenna?
-
Hi! What you see with the comet is the periodicity of the Z while you move on the frequency, right?
-
Do you have a list needed to make one?
-
So, how does it perform once mounted up top the tower?
-
Grate, i want to create 4g lpd antena, can you give me cutting dimension and more advise about this antena, ?
-
Sorry I do not. You might search for a manual online. Otherwise you can always support the company by purchasing one...
-
need to slow down what was swr lookimng for scanner beam. its not just ham its we pirates
-
They claim gain of 10 to 12 dBi. That sounds pretty good to me. Is that claim highly exaggerated?
-
Does this antenna need a rotator?
-
small design too IF SWR all good then all ok
-
A cracker for milair.