2006, 2007, Subaru Tribeca B9 bulb console shifter indicador light replacementd

Thanks Man! I couldnt figure out how this came apart! I found a bunch of coins inside and the whole sport mode was jammed up.

Hello. Thank you for the video. In order to access the bulb, I removed two Philips screws on the left, lifted up slightly over a plastic pin, pulled the trim away from the bulb holder in order to turn it counterclockwise and remove it from the housing. I used a T5 LED. It did not light up. I removed the T5 LED and flipped it then it lit up!!

Excellent video, I was able to replaced the one in my car. Very helpful :)

Sweet description thanks!

Cómo puedo retirar la palanca? Si alguien me puede ayudar con eso,se partió la tapa inferior

My local part stores cannot seem to tell me which replacement bulb this requires. I see yours said "73" on it. I'm guessing that's a Sylvania 73. I tried matching one up today (not sure it was a 73 though) and it did fit the socket, but would not light up. I think the contacts would not line up properly. I put a 12V test light in the contacts and it did light, so I do have power. Your video does not actually show this working. Did it work properly with the Sylvania 73. Also, I have a light above it (for the temperature controls) burnt out also. I see two screws holding it on and I'm guessing the rest are clips. Have you changed any of those bulbs? Are they the same as the one in this video?

Yes the is the bould the you need but they have different ones the you can use, best take the bould with you to you store AutoZone ECT thank you

I could not get the bulb out of the white containment block. It is as if it is clues into the block

What type of bulb you use to replace? Thank you