Replace faulty clicking mercruiser tilt n trim pump solenoids stuck 5.7 V8
14,869
Published 2022-09-08
All Comments (11)
-
Wish this didn’t skip the removal of the pump process.
-
I just replaced my solenoids. Gotta put the pump back into the boat to see if I have success or not.
-
My trim motor isn’t firing but it doesn’t click. I can hotwire past the solenoid direct from battery and the tilt motor works. Wonder if there’s a fault somewhere before the solenoid
-
My tilt down was working but tilt up was not. I replaced both solenoids now the up works and down doesn't. Any suggestions?
-
I replaced both solenoids yesterday but still getting clicking noise. Any recommendations as to what else to check?
-
May I ask what wire did you use for a jumper wire ? Was that a 12 volt connection to the plug ?
-
What lube do you recommend to use to put in the reservoir?
-
What was the part numbers on the silonods. Mine is also clicking
-
all right
-
What is the red block you speak about tightening called