diy venturi low presure or high only $2.00 hack
595,447
Published 2014-09-23
cost me only $2.00....make sure the drip tubing is barely show @ center hole..
parts are from homedepot
All Comments (21)
-
wow....probably the best and cheapest venturi diy on youtube. excellent job and excellent video
-
Finally, I have a use for my collection of 13/6 drill bits!
-
Thanks mate your genius it works like a dream thanks for taking the time to do the vid your filter is also very well designed good way to save money and water clarity is very good 👍
-
Using your plans, built a venturi for my bait tank that works perfectly. Thanks!!
-
Simple and straight forward for the DIY'rs. Thanks mate!
-
heck yeah! i've been scratching my head on how to assemble a ton of these, and now it's so obvious with that converted plug
-
Thanks for the video. This worked great for my pond!
-
Nice idea, simple and efective.
-
Excelente idea, simple y genial.
-
I used this video just now to confirm my initial idea to aerate my swimming pool. I took a piece of 1/2 inch hose, drilled a hole to suit a piece of irrigation tube, cut the tube at a 50 degree angle at the tip that goes inside the main hose, then push the hose in about half way making sure the angled cut is facing the direction of the water flow. I got just as good air as in the video at a depth of around half a metre. Thank you very much friend
-
In wonder if that will work with flood and drain outlet, sump side? I'm going to try an exeriment tommorow after work. Awesome video fellow creator! Thanks for sharing and as always Keep Building👍
-
LOVED IT BRO... Clear enough !! No need to speak when it's so easy! Whoever didn't understand it, is because they won't make the build anyway. .. Ignore the Haters... I've finally found what I was looking for in order to avoid high-cost air pumps on my Prawn Pond! Keep it up
-
Excelente video, bien explicado y bien demostrado y con buenos detalles, saludos.
-
Nice, to put O2 in the aquarium & aquaponic system without air pumps. Thanks.
-
Great vid simple and effective, i literally just made this
-
sweeeeet. cheap and easy. thanks!
-
Very simple and easy build. Works fine, But what do I have to do for it to work even better? I have 620gph pump I drilled a hole in the center with 17/64 and for the top hole i used 1/4 with 1/4 tubing. IF i make the center hole bigger and use bigger tubing would I get better results ?
-
Love it. Bravo.
-
Great idea
-
Nice! Can this work 50-60cm from the surface? How deep in fact? Trying to find a solution for my pound...