Amazing idea and tip in 7 minutes! This metalworking secret will surprise you
415,086
Published 2023-12-28
==================================
Friends, my name is Sergey! I am the author of the channel Cool Ideas DIY.
On this channel I present everything I have made with my own hands.
Creative ideas, useful tips, inventions!
✅Enjoy watching! Don't forget to subscribe, like, and turn on the bell🔔
==================================
🔥Homemade
🔥DIY
🔥Creative idea
🔥Make in home
🔥Life hack
🔥Crafts
🔥Inventions and tools
🔥Usefull and Helpful ideas
🔥Tips and tricks
🔥Welding
🔥Turning work on a lathe
🔥Metal workshop ideas
🔥Making tools from metal
🔥Unique tools that you must have
🔥Waste metal craft ideas
==================================
#Cool #Craft #Diy #Homemade #Welding #Amazing #Ideas
💗Thanks for watching, LIKE, S
All Comments (21)
-
Happy New Year, my friends🌲🌲🌲
-
great project, I have a few similar. I have found couple of minor things helpful. making a through hole tapped on back of that with a grubscrew pushing the cutter out makes it easier to adjust (I prefer M3x0.5, one turn=0.5mm deeper cut or 1mm bigger hole). drilling hole ofset so edge of cutter passes center (or closer to anyway) you don't have to grind half the metal off to get cutting geometry right.
-
Very good work!
-
Hello,Fly cutter👌thank you for filming and happy new Year😉
-
Nice slotting tool/bore cutter (not a fly cutter) You could potentially use the base part for both, by cutting a hole in the base for the HSS tip and with a locking screw mounted on the side, so this little tool could serve multiple purposes, kudos!
-
Ficou top demais
-
Complimenti per i perfetti video, per la tua abilità e professionalità che hai e per il tuo meraviglioso laboratorio (penso che tutti noi appassionati di meccanica vorremmo avere), è sempre un grande piacere seguire i tuoi lavori (sempre interessanti).😃👍👋 Un saluto da Roma.
-
Very nice
-
Best worker... and getting better ❤❤❤
-
świetny warsztat 👍👍
-
Well done, but hardly a secret, most tool-and die makers would have a few of those in their kit, made as and when required.
-
Try making holder with the tool hole going at an angle. Say about 45deg. you can then machine on the flat. I guess you probably know all this anyway. Happy New year 🎊.
-
Top mano
-
Feliz año nuevo, buen trabajo 👍🥂
-
Great❤😊
-
Excellent job
-
Awesome way to save money on broach ! …. I made a similar tool for my mill to make the nail nick in my pocket knife blades … great job !
-
200 years ago when the lathe was pretty much invented, we called this device a fly cutter. Nothing new here I am afraid.
-
Nice!! Happy New Year
-
It was an interesting trick, my friend❤
