2019-2021 Dodge Ram 2500/3500 LED Install
57,496
Published 2021-02-27
All Comments (21)
-
These ram trucks use the CK style socket for the turnb signals so a standard bulbs will not work. The power and ground contacts are oriented differently for the CK socket. Lasfit makes both versions of the bulb. You would have to use the 7443/7444na CK bulb from lasfit
-
On the blinkers, they have a CK Socket, so if you get the 7443D-CK they will work.
-
With the blinker bulbs the reason they didn’t work is that the factory bulb wasn’t a dual filament (as far as I could tell). If so it wasn’t designed with both circuits to stay on dimly and then flash. Vehicles that have the parking lights stay on all the time and then blink should work with the switchbacks.
-
BTW you do not need the canbus decoders for the install, just did mine today and no errors on the instrument panel, also installed the LASFIT lights.
-
i did all led on mine, i even found these cores to put on the wires to block the rf signals that the break lights give off
-
Picking up my new tradesman this week sometime. I havent had halogen bulbs in a vehicle since I did a swap back in 2008, I plan on doing this ASAP. Appreciate the detailed video
-
Do you have part numbers or links to all the lights you got
-
That cutoff is a foot higher at that distance. Did you ever align the bulbs or aim the housings to stop blinding other drivers?
-
Excellent, thanks for sharing . 👍
-
On my truck with the halogen interior lights. Will dim to off with the led lights do that also
-
Where can this be purchased from ?
-
Lasfit LED Reverse lights don't work either. Won't fit the light socket. I sent mine back
-
What about for 2022 ram 2500? Bighorn
-
Help! Anyone know the LUMENS output of the stock Tradesman halogen headlights 5th Gen 2019+
-
What bulb is did you use for the fog lights?
-
I meant to tell you, i have a 2020 Ram 2500.
-
Can you explain the process of what all you need to disconnect on the intake if you can’t fit your hand in there?
-
Anyone have issues putting the dust cover back on man it’s been hell
-
I have a 2006 Tundra that needs attention regarding the frame. Is that something i could hire you to address?
-
Are canbus required?
