LG TV. on the TV screen is a picture with lines vertical and horizontal. repair successfully

Worked perfectly, thank you. I was given a Toshiba 50UA2B63DB TV and told I could have it if I could fix it as he'd already bought a replacement. I was considering taking it to a repair shop tomorrow when I found your video with an almost identical picture problem. The layout is different but the principle was the same. I don't know if you mention it anywhere but it was 8 connectors covered up, had to pause and count them. Mine was the data ribbon on the left and the 1st 8 connectors left to right. With trial and error I found the right spot on about the 5th or 6th go. Thank you again.

This is informational ASMR! Well done 👏🏿

Grande maestro !!:washhands::washhands:

Resp Sir! Nice Class Sir. -- ChinnaRao Paderu Andhrapradesh

This video guided me, thanks. The VGH line was partially shorted. With all screen flexes connected it had 18V instead 25V. I just separated it using tape and tv came to life.

It works for my LG 47" TV. Hard job! I try 8 times to apply the tape. Share my method-- don't cover first 2 pins. make tape width 4-6mm and apply from 3rd pin. there are two types of wires- 50p or 51p. so you need to try 4mm to 6mm with pin pitch increase to get the best result.

Excellent video this fixed a hitachi 58inch with the same problem Easy follow instructions and tv is now working ok

Kind of worked for JVC LT-58CA810. Started from leaving first and then second open, closing a bunch from 2 to approx 10. Then moving around closing 1 to 8-10. Ended up covering only the first one and it worked, however there is a barely visible line colour dependant remaining, which is fine with me, especially compared to the original problem. Thanks for the guidance in the video!

Love the easy quick fixes they’re the best thanks 😊

Fantastic! It took me a long time to get it right, but in the end I got there. For me, it was the other ribbon. Your trick saved me the cost of a new TV. Thank you. I hope the workaround lasts a long time. ;)

I can't believe this worked but it did! The TV repair guy said it needed a new motherboard and wasn't worth repairing. Just shows what he knows!

Nice solution. Realy Good video. Congratulation.

It works. Use adhesive paper tape cut to 7mm wide. If it does not work on one ribbon, try on the other ribbon, at the same place - at the inner corner.

Thanks master found that helpful

Thank u brother working my lg tv😊

Tnx a lot 🙏You got me out of trouble😅♥️

Thank you so much ☺️

How can it work if you partially sever the connection between the screen and the video board? Makes no sense.

Great job ,I repair 2 of my tvs😊😊

What a relief !!! It was a zero cost DIY for my LG although I had to try 5 times to locate the ribbon connections to be taped. ( In my case the defect was horizontal lines on the screen and taped (C2) the top ribbon.) Thank you for sharing.